Skip to main content
RACELOGIC Support Centre

04 - Brake Test SW Viewing post processed data

To generate brake test results from previously recorded data, the software must be set to Offline.  This can be done by clicking on the Options tab and ensuring that the Online option is unchecked.
 

post (1).png
 

Load a VBO file in to the software by clicking on the File header tab at the top of the menu bar, and then clicking on Load. 
 

post1 (1).png
 

The loaded file will then automatically be scanned and the results displayed.
 

post2 (1).png

  • Was this article helpful?