Skip to main content
RACELOGIC Support Centre

Hardware Configuration - Lane Departure Warning/ Park Assist (NTRIP and IMU)

To connect the hardware using an NTRIP correction solution and IMU Integration for Lane Departure Warning or Park Assist test, please refer to the configurations below:


The following diagrams show the recommended hardware configuration for the Lane/Bay Survey and the Vehicle. The items greyed out are not essential but many customers may find them beneficial. Click on the diagrams to open a high resolution pdf configuration.

Connection between the VB3i and laptop/computer should be made via USB or Bluetooth to ensure optimum performance.


Please ensure that all vehicle antennas are correctly positioned and connected.

Lane/Bay Survey

Single Multiple Target Vehicles (CAN Hub, NTRIP and IMU) - Subject.png

Vehicle

Single Multiple Target Vehicles (CAN Hub, NTRIP and IMU) - Subject.png

  • Was this article helpful?