Hardware - VBOX 3i RTK
- Last updated
- Save as PDF
The following are lists of relevant equipment for DSM testing:
Racelogic Products
| QTY | Product Code | Description |
|---|---|---|
| 2 | VBVDHD2 | VBOX Video HD2 (with firmware version 1.5.5.3 or later) |
| 4 | RLACS329 | HD2 Cameras (compatible with HD2 units) |
| 1 | VB4ADAS | VBOX 3i RTK |
| 1 | RLCAB010LE | 12V Power supply for VBOX 3i RTK |
| 1 | RLVBACS024 | CAN Splitter |
| 1 | RLACS362 | DSM Handheld Trigger |
| 1 | RLADAS-AS | Audio Sensor |
| 1 | RLCAB007-2 | Lemo to unterminated cable for Audio Sensor to Analogue Input |
| 1 | RLADAS_VS | Visual Sensor |
| 1 | RLACS356 | Antenna for VBOX 3i RTK |
| 1 | SUBCON15M-SH | D-Sub 25 connector for Analogue Input |
| 2 | RLCAB005C | CAN/Serial cables for HD2 to VBOX 3i RTK |
| 2 | RLACS231 | SD card for HD2 units |
| 4 | RLACS269/RLACS270 | Camera clamps |
| 4 | RLACS287 | Suction Camera Mounts |
Other Equipment
| Description |
|---|
| Small flat screwdriver for wiring the ADAS sensors and the handheld trigger into the D-sub connector. |
|
Occlusion accessories (as set out in Euro NCAP TB39 i.e. VBOX DSM Sunglasses) The Euro NCAP DSM assessment protocol requires various occlusion accessories. Many are everyday items that have no specifications, however, the Sunglasses and Facemask accessories do have specific requirements:
|
Optional Equipment
| QTY | Product Code | Description |
|---|---|---|
| 2 | RLACS333-L | Battery Pack for powering the HD2 units separately. Alternatively you can use a third-party power splitter to provide separate power sockets for the HD2 units and the VBOX unit. In this case you will also need 2 RLCAB010LE cables to connect each HD2 unit to the power splitter. |