Refine results by selecting a filter or click on 'All results' to search the whole site.
Skip to main content
RACELOGIC Support Centre

Have your contact points been set correctly?

  1. Last updated
  2. Save as PDF

Check the contact point settings within VBOX Manager (connected to subject vehicle) against the vehicle measurements. The image to the below shows how the offsets should be measured. 
 

11.png

 

12.png

OffsetNew.png

 
   

Check the comments section of a recorded .vbo file viewed in Notepad.

The example below is showing a defined contact offset point 3.38m left and 0.9m back of the antenna location (facing forward). 

For the target vehicle, 1.58m right and 3.90m forward of the antenna location.
 
133.png
   
Have the contact points been set correctly?

 

Yes

No 
  1. Back to top
  • Was this article helpful?

Recommended articles

  1. Article type
    How-to
  2. Tags
    This page has no tags.