How to Update the Firmware

Last updated
Save as PDF
Share
1. Share
2. Tweet
3. Share

This page contains the required equipment and steps to update the firmware on the ADAS Audio Sensor.

Equipment

PC/Laptop
Racelogic Upgrader Software
Audio Sensor
USB-C cable (TV1AM20MB31)
ADAS Audio Sensor Firmware File

Updating the Firmware

Download the latest Audio Sensor firmware file from the VBOX Automotive website.
Connect the TV1AM20MB31 cable (USB cable) to the USB-C port on the back of the Audio Sensor and the USB-A port on the PC.
Make sure that other software that may try to use the COM port communications, such as VBOX Setup, is closed.

Either double-click on the ‘.ruf’ firmware upgrade file (this will auto-run the Racelogic Upgrader software) or run the Racelogic Upgrader software and load the ‘.ruf’ firmware upgrade file.

Note:

Make sure you are using the latest version of the software.
You can download the software from the software section of the VBOX Automotive website.

Select the correct COM port under Options and click Upgrade to start the process.
The software will alert you when the update has been completed.