GNSS

Last updated
Save as PDF
Share
1. Share
2. Tweet
3. Share

You can access the menu by pressing the OK button.
Use the Up and Down arrows to navigate through the menu and press the OK button to enter a submenu or change a setting.
When editing a setting, the Up and Down buttons will let you scroll through the available options for that setting and the OK button will confirm your selection.
Use the Back button to exit a setting.

You can use this menu to configure the GNSS settings.

GNSS Coldstart

This setting will perform a coldstart of the GNSS Engine.

You can find more information here.

DGNSS Rate

This setting configures the DGNSS baud rate.

To make sure that VBOX Omega receives the DGNSS correction signal, you must set the correct DGNSS rate. All Racelogic blue boxed radios use 115200 kbit/s, and Satel grey boxed radios use either 19200 kbit/s or 38400 kbit/s.

VBOX 3iSDR_GNSS_DGNSS Rate_115200_Selected.png

Elevation Mask

This setting lets you change the elevation mask, which is selectable from 10 to 25°.

If the testing area has nearby trees or buildings, you may benefit from increasing this value to reduce the effect of multipath.

You can find more information here.

10 (default)
15
20
25

Note: Increasing this value will reduce the number of satellites VBOX Omega will be able to use.

VBOX 3iSDR_GNSS_Elevation Mask_10_Selected (Framed).png