Refine results by selecting a filter or click on 'All results' to search the whole site.

Tests

Last updated
Save as PDF
Share
1. Share
2. Tweet
3. Share

You can access the menu by pressing the OK button. Use the Up and Down arrows to navigate through the menu and press the OK button to enter a submenu or change a setting. When editing a setting, the Up and Down buttons will let you scroll through the available options for that setting and the OK button will confirm your selection. Use the Back button to exit a setting.
This menu can be used to configure test/lap timing settings.
S/F Gate Width Defines the width of any gates set up to 99.99 m (25 m by default).
Retrigger Time Defines the minimum time between triggers for the second trigger to be valid. If a trigger is detected before this time, it will be ignored (1 s by default).
Lap Pulse Width Defines the width of the pulse emitted when crossing a lap or split timeline (1 s by default).
Split to Split time Determines whether the 'Split Time' CAN channel is either the total lap time at the point of crossing the split line or the delta time between split lines. SF - Split or Split - Split