The screen will display data when the VB2 is operating. It also displays all the menus required to configure the VB2 via the front panel controls.
On start-up, the display screen shows the unit’s firmware version and current offset value.
During normal operation, the display screen displays Speed (mph or km/h) and Slip Angle (dual antenna units only) Scroll left or right ( ‘◄’and ‘►’), to display Pitch or Roll Angle instead.* As well as the number of satellites that the VB2 has locked on to, there are also three status indicators at the top of the display.
*Slip, pitch and roll angle only available on dual / triple antenna units.
|GPS Status||Front Panel Light Status|
|No Satellite Lock||-||SAT (flashing)||RTK (flashing)|
|Antenna A only SAT Lock||-||RTK (flashing)||RTK (flashing)|
|Antenna A and B SAT Lock*||-||RTK||RTK (flashing)|
|Antenna A and C SAT Lock*||-||RTK (flashing)||RTK|
* SL twin / triple antenna units only
If a DGPS mode is enabled, it is indicated by the middle indicator light with one of the following messages.
|DGPS Mode||Light Status|
|WAAS, SBAS or EGNOS Differential correction||WAAS|
|40 cm Differential correction from Base station||40 cm|
Logged File name:
When an SD card is inserted the file name of the logged file appears on the screen whilst data is being logged.