Skip to main content
RACELOGIC Support Centre

04 - VBOX II VBOX Setup Overview

Introduction

VBOX Setup Software can be used to configure VBOX II units and provides greater functionality in comparison to using the front panel.


IMPORTANT - The software is not compatible with VB20SL3 units.

Connection

To configure VBOX II, the VBOX needs to be connected to a power source and a PC.
 

Configuration can be performed using VBOX Setup software, which can be downloaded here. You can connect to a computer either via an RLCAB001 cable to the 'SER' input and the computer's serial port (usb-serial adapter may be required), or via an RLCAB042 cable to one of the computer's USB ports.
 

IMPORTANT – Microsoft Windows 7 SP1 or newer is required (must be compatible with .Net Framework 4.7.1)


Once physically connected and powered, open the software and use the drop down list to select the correct COM port that the VBOX II is connected to. VBOX Setup automatically connects to the selected device and enters the VBOX II setup screen. 
 

VBII VBOX Setup Connect.png
 

Note: An auto detect message may appear if the baud rate has been changed from the default value – select ‘Yes’ to allow the different baud rates to be scanned.

Software Overview

VBII VBOX Setup Overview.png

  1. Menu - The side bar allows selection between the different settings menus. Click the buttons to change.
  2. Current menu - Displays the currently selected menu.
  3. Bus usage - View serial and CAN channel usage.
  4. Settings area - This area contains all the settings options dependent on which menu is selected.
  5. Write to unit - After making changes to setup, the write to unit button should be selected to ensure the settings have been uploaded.
  6. Close - Closes the software, if changes have not been saved to the unit, you will be prompted to save the settings.
 

Settings Menus

The side bar enables you to switch between the different settings menus; General, Channels, Logging, GPS, CAN and Output. Click on the menus below to view more information.

General Menu

VBII VBOX Setup General small.png

Channels Menu

VBII VBOX Setup Channels small.png

Logging Menu

VBII VBOX Setup Logging small.png

CAN Menu

VBII VBOX Setup CAN small.png

GPS Menu

VBII VBOX Setup GPS small.png

Output Menu

VBII VBOX Setup Output small.png

  • Was this article helpful?