The brightness of the VBOX Touch LEDs can be adjusted by pressing the Settings Button on the bottom left of the screen, and then using the Forward arrow or swiping the screen to the left to navigate to the General Settings menu.
You can manually adjust the LED brightness between 5 levels, with 1 being the dimmest and 5 being the brightest setting (this is extremely bright!) or turn off the LEDs. Tap the button to cycle through the available options, the LEDs will preview the brightness level.
The 4 LEDs at the top of the unit provide visual feedback dependent on what process is being performed:
- Accel/Decel Mode: If Alert at End is enabled, the LEDs will flash green for 0.5 s once the test end criteria is met.
- Lap Timing Mode:
- The LEDs provide a live reference lap speed comparison (Delta-V).
- The LEDs will illuminate blue during the process of creating a Reference Lap.
- When loading a Track Database file, the progress of the track database update is displayed via the LEDs; each lit LED will represent 25% of the process with all LEDs extinguishing when the process is complete.
- When a Track Layout is changed, the LEDs will briefly flash green twice.
- When a Finish Line is cleared, the LEDs will briefly flash green twice.
- When a Standing Start is Enabled or Disabled, the LEDs will briefly flash green twice.
- Speed Mode: If a Target Speed LED Alert has been set, the LEDs will flash green when the value is reached.
- Screenshot: If a screenshot has been saved successfully, the LEDs will illuminate yellow in sequence from left to right to display the progress of writing to the SD card.
- Reset: The LEDs will briefly flash green twice when a screen has been reset.