Skip to main content
RACELOGIC Support Centre

How to Change VBOX Touch Track Layout


It is possible to change the track layout used by VBOX Touch for Lap Timing. Within the Lap Timing Mode, press the Settings Button Settings.png on the bottom left of the screen to access the Lap Timing Settings.

VBOX Touch Lap Timing Select Track.png

VBOX Touch Lap Timing Settings Track.png

VBOX Touch has an inbuilt track database containing a vast number of circuits throughout the world, a list of the currently supported circuits can be found here.

The unit will display the currently selected track based on the GPS location. If multiple layout are available, you can press the Select button to scroll through the different options. To choose a layout, press the desired option and then select the Confirm Button Confirm Button.png on the bottom right of the screen, or press the Cancel Button Cancel Button.png on the bottom left of the screen to return the Settings screen without saving.

Note: If you press the Select button when you are not in the vicinity of a known track, the unit will display a NO LIST AVAILABLE message.

VBOX Touch Lap Timing Settings Track Select.png

If the layout is changed, the LEDs will briefly flash green twice and the unit will emit an audible confirmation notification. The layout will be remembered after each power cycle if it is determined to be local to the detected location.

Note: When the selected track is changed, all existing lap timing values will be cleared and the new lap timing gates will be used.

  • Was this article helpful?