Refine results by selecting a filter or click on 'All results' to search the whole site.

Pinouts - VBOX Touch (v2/v3)

VBOX Touch PIN OUTS.png

Right-side view of VBOX Touch

Connector 1 - GNSS Antenna

Antenna.png
 

PIN I/O Function
Centre I RF Signal/Power for active antenna
Chassis I Ground

Connector 2 - D IN (3-pin Lemo)

Digital Input Connector that can be used for logging switch or event and brake triggers. 

3 pin Lemo.png
 

PIN I/O Function
1 I Ground
2 I Digital Input 2 - Logging ON/OFF
3 I Digital Input 1 - Event/Brake Trigger

Connector 3 - CAN/SERIAL (5-pin Lemo)

Isolated CAN bus with active 120 ohm terminating resistors

5 pin Lemo.png
 

PIN I/O Function
1 O RS232 Tx
2 I RS232 Rx
3 I/O CAN High
4 I/O CAN Low
5 I Power
Chassis I Ground

Connector 4 - CAN/SERIAL (5-pin Lemo)

Isolated CAN bus with active 120 ohm terminating resistors

5 pin Lemo.png
 

PIN I/O Function
1 O RS232 Tx
2 I RS232 Rx
3 I/O CAN High
4 I/O CAN Low
5 I Power
Chassis I Ground

Connector 5 - POWER (2-pin Lemo)

2 pin Lemo.png
 

PIN I/O Function
1 I Power
2 I Ground
Chassis I Ground