Refine results by selecting a filter or click on 'All results' to search the whole site.
Skip to main content
RACELOGIC Support Centre

Getting Started

  1. Last updated
  2. Save as PDF
This page contains important and useful information about the VBOX LapTimer (RLVBLAP-R and RLVBLAP-S).
 Registration

Please register your VBOX unit so that we can provide you with notifications about the latest software releases and firmware upgrades for it and offer technical support.

Register your device here.

What is in the box?   
▼VBOX LapTimer with Side Connectors (RLVBLAP-S)

When you purchase a VBOX LapTimer with Side Connectors, you will find the following items when you open the box:

Product Code Quantity Description
VBLAP02-S-V1 1 VBOX LapTimer Unit with connectors on the side
RLACS262 1 GNSS Antenna
RLCAB14LE 1 Unterminated Power Cable
RLACS313 1 8 GB SD Card
RLACS287 1 Lightweight Windscreen Suction Mount

 
▼VBOX LapTimer with Rear Connectors (RLVBLAP-R)

When you purchase a VBOX LapTimer with Rear Connectors, you will find the following items when you open the box:

Product Code Quantity Description
VBLAP02-R-V1 1 VBOX LapTimer Unit with connectors on the rear
RLACS262 1 GNSS Antenna
RLCAB14LE 1 Unterminated Power Cable
RLACS313 1 8 GB SD Card
RLACS359 1 Rear Connector Bracket Assembly

 
▼Optional Extras

Depending on the application requirements, you may need to purchase additional accessories for your LapTimer.

Product Code Description
RLCAB010LE In-Car Power Supply
RLACS286 Roll Cage Camera Mount with Thumb Nut for RLVBLAP-S
RLCAB122 VBOX LapTimer Connection Cable for connecting VBOX LapTimer to a Video VBOX Pro or VBOX Video HD2
Power Supply 

Any suitable 12 V supply powers the  LapTimer. You must wire the unterminated end of the RLCAB014LE cable directly to a compatible power supply or to a connector that you can use with a compatible power supply. 

The power port is the top Lemo port on the unit. 

When you power up the LapTimer unit, the LEDs will light white and sweep through the LED array to indicate that the unit is powered and initialising.

Compatible Media

The LapTimers can record to MMC, SD, SDHC and SDXC media cards formatted in a FAT or FAT32 format.

SDXC cards will be formatted as exFAT by default, a format type not supported by LapTimers.  You can still use them, as long as you reformat them to FAT32 first. There are various free third-party applications available online to format SDXC cards.

No Media

If you do not have an SD card inserted in your VBOX LapTimer, it will show a No Media message while the vehicle is moving at speeds of 5 mph or less. This makes it easier for you to make sure that you have an SD card inserted before you start your logging.

Buttons
OK Button
Navigation buttons.png

You mostly use the OK button to configure the settings in the Menu.

However, it will also have some functionalities depending on the mode that is currently active on the screen. 

See the list below for the full list of functionalities for the different display modes. 
 
Mode Function
Speed  Start and stop logging
Max Speed Reset max speed value
Predictive Lap Timing Single press fixes the current or stored lap as the reference lap, depending on the chosen settings.
Predictive Lap Timing Press and hold for 5 seconds to clear the stored reference lap, reset the lap count and clear all stored lap times. 
Lap Timing Set a new start/finish line
Lap Count No action
Lateral G Reset max g reached
Longitudinal G Reset max g reached
Shortcut Button
4th button.png

Pressing this button in any display mode (except Speed Mode) will make the unit display the Speed Mode for 10 seconds before returning to the original display mode. 

It will also act as a shortcut to exit the settings and go back to the display modes.

 

  1. Back to top
  • Was this article helpful?

Recommended articles

  1. Article type
    Topic
    Audience
    Public
  2. Tags
    This page has no tags.