02 Installing VBOX LapTimer in Your Vehicle

Obtaining the Best GPS Quality

Appropriate placement of the GNSS antenna is crucial to the quality of the data that is being recorded.

Be aware of objects that can shadow the antenna or block the signal to the antenna. Some objects can also reflect signals which can send weaker GNSS signals to the antenna. This is called multipath, and these reflections can disturb the signal in an unpredictable way.

If an antenna is not mounted on a large enough ground plane, multipath reflections can also come from the ground beneath the antenna.

If you are using the antenna without a sufficient ground plane (such as on a bike or carrying the unit by hand), you can put a sheet of metal underneath the antenna (this can for example be copper or aluminium foil) or use an antenna with strong multipath-rejection properties (ACS320).

Antennas, such as the ACS320, are much larger and more expensive than the standard antennas that come supplied with a VBOX unit, but you can mount them on a pole to get them higher from the ground and away from shadowing items.

On a motorbike, you should place the antenna as far from the rider as possible to reduce the rider's shadowing effect. The best place is usually at the back of the bike.

Reflected signals to antenna.png

Illustration showing multipath reflections from the ground and surrounding buildings.

You can find more information about optimal antenna placement here.

Acquiring satellite lock

Tall buildings or trees can block GPS signals, causing a reduction in the number and quality of satellites being tracked, leading to inaccurate position measurements and a noisy velocity signal.

GPS works best in open areas/ Avoid tree-lined roads

GPS Coldstart

If your VBOX LapTimer is struggling to acquire a satellite lock, you may have to perform a GPS coldstart. This may be necessary if the unit has not been in use for a number of days or it has moved location dramatically since its last use. You can perform a coldstart by selecting MENU > GNSS OPTIONS > COLDSTART.

Note: You cannot access the GPS Options menu when you use the LapTimer in OLED mode. In this instance, you must perform the coldstart on the connected device.

Hardware Connections

Standalone

With VBOX Video HD2

With Video VBOX Pro

With Video VBOX Lite

With Video VBOX Waterproof

Video VBOX Waterproof.png