Skip to main content
RACELOGIC Support Centre

How to Change Performance Box Touch Track Layout

 

It is possible to change the track layout used by Performance Box Touch for Lap Timing. Within the Lap Timing Mode, press the Settings Button Settings.png on the bottom left of the screen to access the Lap Timing Settings.
 

PB Touch Lap Timing Select Track.png
 

VBOX Touch Lap Timing Settings Track.png
 

Performance Box Touch has an inbuilt track database containing a vast number of circuits throughout the world, a list of the currently supported circuits can be found here.

The unit will display the currently selected track based on the GPS location. If multiple layout are available, you can press the Select button to scroll through the different options. To choose a layout, press the desired option and then select the Confirm Button Confirm Button.png on the bottom right of the screen, or press the Cancel Button Cancel Button.png on the bottom left of the screen to return the Settings screen without saving.

Note: If you press the Select button when you are not in the vicinity of a known track, the unit will display a NO LIST AVAILABLE message.

VBOX Touch Lap Timing Settings Track Select.png

If the layout is changed, the LEDs will briefly flash green twice and the unit will emit an audible confirmation notification. The layout will be remembered after each power cycle if it is determined to be local to the detected location.

Note: When the selected track is changed, all existing lap timing values will be cleared and the new lap timing gates will be used.

  • Was this article helpful?