LabSat3W - PIN OUTS - RACELOGIC Support Centre

Connector 1 - POWER (Lemo 2 PIN)

2 pin Lemo.png

PIN	I/O	Function	Range
1	I	Power+	8 - 30 V
2	I	Ground	0 V

SMA Connectors - RF OUT, RF IN and REF

PIN	Name	Function	Range
Center	RF IN	RF Signal Input DC bias for active antenna	Bias output 2.8 - 3 V
	RF OUT	RF Signal Output DC Blocked
	REF	10 MHz Reference Clock Input/Output
Chassis	-	Ground

Expansion port 36 way MDR type connector

The 'EXPANSION' connector on the rear of LabSat 3 Wideband gives access to a number of signals including CAN Bus, RS232, 1PPS and Digital input/output. Accessory RLACS202 is used to provide user signal access for integration into the users test system. Pin functions are as follows:-

Number	Name	I/O	Function
1	1PPS	O	Signal from Internal GNSS monitor. Becomes active when monitor is locked. 5 V Level. 25 mA
2	DIGO 1	O	User digital output. 5 V Level. 25 mA max
3	DIGI 1	I	User digital input. Up to 12 V input level. Detection threshold=2.5 V
4	-	-	-
5	-	-	-
6	DIGO 2	O	User digital output. 5 V Level. 25 mA max
7	-	-	-
8	DIGI 2	I	User digital input. Up to 12 V input level. Detection threshold=2.5 V
9	-	-	-
10	CAN 1 H	I/O	CAN Bus High Channel 1 – Standard ISO 11898 voltage signal levels for CAN
11	CAN 1 L	I/O	CAN Bus Low Channel 1 – Standard ISO 11898 voltage signal levels for CAN
12	CAN 2 H	I/O	CAN Bus High Channel 2 – Standard ISO 11898 voltage signal levels for CAN
13	CAN 2 L	I/O	CAN Bus Low Channel 2 – Standard ISO 11898 voltage signal levels for CAN
14	I2C SDA	I/O	I2C Bus Data – Reserved for future use
15	I2C SCL	I/O	I2C Bus Data – Reserved for future use
16	I2C VCC	I/O	I2C Bus Data – Reserved for future use
17	RS232 Tx	O	RS232 data output. NMEA Data from GNSS monitor or User RS232 data if enabled. Standard RS232 Level
18	RS232 Rx	I	User RS232 data which is recorded if RS232 is enabled in Digital configuration menu. Standard RS232 Level
19	Ground	O	Ground Connection
20	Ground	O	Ground Connection
21	Ground	O	Ground Connection
22	-	-	-
23	-	-	-
24	-	-	-
25	-	-	-
26	-	-	-
27	-	-	-
28	IO_0	I/O	Reserved
29	IO_1	I/O	Reserved
30	IO_2	I/O	Reserved
31	IO_3	I/O	Reserved
32	-	-	-
33	Ground	O	Ground Connection
34	Ground	O	Ground Connection
35	Power	O	Connected to input power – Max 250 mA
36	Power	O	Connected to input power – Max 250 mA

Expansion Connector

LabSat 3 Expansion Connector.png

Locking Expansion Connector (RLACS261)

Locking Expansion Connector.png

Connector 1 - RS232 (9 PIN SUB-D)

PIN	I/O	Function	Range
2	O	Tx	RS232 data output. NMEA Data from GNSS monitor or User RS232 data if enabled. Standard RS232 Level
3	I	Rx	User RS232 data which is recorded if RS232 is enabled in Digital configuration menu. Standard RS232 Level
5	O	Ground	-

Connectors 2 / 3 - CAN 1 / CAN 2 (9 PIN SUB-D)

PIN	I/O	Function	Range
2	I/O	CAN Low	CAN Bus Low Channel 1/2 – Standard ISO 11898 voltage signal levels for CAN
7	I/O	CAN High	CAN Bus High Channel 1/2 – Standard ISO 11898 voltage signal levels for CAN