Skip to main content
RACELOGIC Support Centre

LabSat3W - Technical Specificiation

LabSat 3 Wideband Technical Specificiation


GPS: L1, L2, L5; Galileo: E1, E5a/b, E6; GLONASS: L1, L2, L3; BeiDou: B1, B2, B3; QZSS: L1, L2, L5; NavIC L5 & S-Band; In Band SBAS, user defined frequency bands like Iridium & SiriusXM radio

Nominal Output Signal Level

-73 dBm/MHz @ 0 dB

Variable attenuator provides between +20 dB and –69 dB of adjustment during replay

RF Channels 3
RF Channel 1 Centre Frequency Selectable
RF Channel 2 Centre Frequency Selectable
RF Channel 3 Centre Frequency Selectable
Number of Satellites Observed All in view
Sampling frequency 10.23 MHz, 30.69 MHz, 58 MHz
Bandwidth 10 MHz, 30 MHz, 56 MHz
Quantisation 1, 2 or 3 bit (I & Q)
Data Format I & Q
User Control 6 Button Membrane Keypad
Display Backlit LCD Dotmatrix
Additional Logging 2 x CAN channels, 2 x Digital channels, 1 x RS232 channel
Removable Battery Pack Yes
Media Storage Included 1 TB SDD and 8 GB SD Card (SD card for firmware upgrade only)
Active Antenna Voltage Supply 2.8 - 4.6 V DC
Reference Oscillator


  • Temperature Stability ±0.05 ppm
  • Frequency Stability ±1 ppm over first year


  • Temperature Stability ±0.05 ppm
  • Frequency Stability ±0.3 ppm over first year
Operating Voltage 8 - 30 V DC
Size 167 mm x 128 mm x 46 mm
Weight 1.2 kg
Operating Temperature 0°C to +60°C Note: Battery will not charge below 0°C or above +45°C (charger shuts down outside this range). Unit will shut down outside operating temperature range.
Storage Temperature -20°C to +60°C Note: Battery will discharge whilst in storage and discharge rate will increase at higher storage temperatures.

LabSat 3 Wideband Dimensions

The LabSat 3 Wideband dimensions (mm):


  • Was this article helpful?