Skip to main content
RACELOGIC Support Centre

LabSat 4 Replay Only

The LabSat 4 Replay Only variants can replay RF signals over 3 independent RF channels. This gives you the ability to replay most GNSS signals, and even a few non-GNSS signals. 

Ideal for bench testing and production lines, these models allow you to replay pre-recorded or simulated scenarios without the need for live-sky recording.

Despite its simplicity, LabSat 4 Replay Only supports many powerful features that can benefit industries such as automotive and aerospace.

These features include:

  • 3 RF channels for multiple constellation testing.
  • Battery-powered or direct power operation.
  • Available for all global navigation satellite systems (GNSS). i.e GPS, GLONASS, BeiDou, Galileo and NavIC.
  • Additional systems include QZSS, IRNSS, SBAS and Commercial differential services.
  • Replay using internal SSD.
  • Remote control over Ethernet.
  • External 10 MHz Reference input.
  • Selectable TCXO/OCXO.
  • Adjustable attenuation (+ 20 to - 69 dB).
  • On-board GNSS receiver for monitoring RF during replay.
LabSat 4 and Tablet_500px.png
Product Comparison

LabSat 4 Replay Only is available in three models: LabSat 4 Lite, LabSat 4 Core, and LabSat 4.

 

LabSat 4 (P) LabSat 4 Core (P) LabSat 4 Lite (P)
3 RF channels 3 RF channels 3 RF channels
10 to 60 MHz bandwidth 10 to 60 MHz bandwidth 10 to 60 MHz bandwidth
Up to 12 bits of I&Q Up to 4 bits of I&Q Up to 2 bits of I&Q
External signals External signals No external signals

As your testing needs evolve, so can LabSat 4.

To ensure a seamless transition to more advanced capabilities, you can upgrade from LabSat 4 Lite to LabSat 4 Core, and from LabSat 4 Core to LabSat 4.

  • Was this article helpful?