Skip to main content
RACELOGIC Support Centre

01 - Brake Pedal Force Sensor Introduction


The Brake Pedal Force Sensor is designed to measure load applied to the brake, accelerator, and clutch pedals during acceleration, deceleration, and transmission shift events. The units are compact and lightweight, making them easy to install and remove. These sensors also have a high overload protection (150% of FS), which prevents damage to the sensor in the event of a vehicle emergency stop. An anti-slip spherical loading surface minimizes the effects of off-axis loading.

Brake Pedal Force Sensor Installed.png



  • Compact, with a 24.5 mm overall height (27.5 mm when mounted on the pedal mounting bracket).
  • Easy to install and remove.
  • 0.5 – 150 kg (1470.99 N) measurement range.


Product Code Quantity Description
OL05910 1 Pedal pressure load cell with internal SGA
MECH0345/346 2 Pedal attachments (top and bottom)
MKX60SKTCAP 2 M8 x 60 mm socket cap head A2 threaded to the head
MKX100SKTCAP 2 M8 x 100 mm socket cap head A2 threaded to the head
M410KH10MCZ 2 Socket screws
RLCAB148 1 4 Way LEMO to unterminated wire cable (2 m)
  • Was this article helpful?