Pinouts
This page contains the pinout information for the connectors on the NTRIP Base Station.
Connector 1 - SMA
| Connector | PIN | I/O | Function | |||
|---|---|---|---|---|---|---|
 |
Center | N/A | RF Signal/Power for active antenna | |||
| Chassis | N/A | Ground | ||||
Connector 2 - 6-Pin Hirose
| Connector | PIN | I/O | Function | |||
|---|---|---|---|---|---|---|
 |
1 | I | Rx RS232 | |||
| 2 | O | Tx RS232 | ||||
| 3 | - | NC | ||||
| 4 | I/O | Power Out | ||||
| 5 | I/O | GND | ||||
| 6 | - | NC | ||||