Skip to main content
RACELOGIC Support Centre

06 Logging - Performance Box Touch V2

Logging

Performance Box Touch logs data via an SD card inserted into the SD Card Slot on the left-hand side of the unit. Depending on the Logging Strategy you have selected in the General Settings, the unit will either log continuously or only when it detects movement.
   
You can manually override the configured logging strategy by tapping on the SD Card Icon when it is green to start or stop the logging. VBOX Touch SD OK.png

The Record Icon will show when the unit is logging data to the SD card.
 

If you have come to a stop, but the Record Icon is still on, you must press the SD Card Icon to stop the logging before you remove the SD card.

Sometimes, due to poor satellite visibility, for example in a garage or close to a building, Performance Box Touch may start recording even if the car is stationary. Always check the Record Icon to make sure the unit is not recording before you eject the SD card.


IMPORTANT
The SD card should not be removed when the Record Icon flashes red as it may cause you to lose data.

Note: If the SD card is removed while the box is still recording, you may need to repair it on a PC before you can use it again.

VBOX Touch Recording Button.png

SD Card Format

Performance Box Touch V2 is supplied with an 8 GB SDHC card in a FAT32 file format, which is the only file format it supports.

If you are looking to purchase a new SD card, we recommend that any card you use has a write speed of above 7 MB/s (4 MB/s is the absolute minimum) and a speed class of 10 (4 is the absolute minimum). We recommend that you use SD cards from quality brands such as Transcend, SanDisk, Kingston or Lexar to ensure the best results.
 

IMPORTANT
If you have an SD card that is formatted in the exFAT or NTFS file formats, you will have to reformat it to a FAT32 file system before it will work with a Performance Box Touch V2 unit.

SDHC cards (2 GB to 32 GB)
Supplied or purchased SDHC cards are formatted in the FAT32 file format. This format is supported by Performance Box Touch V2.
SDXC cards (64 GB and above)
Purchased SDXC cards will be formatted in exFAT or NTFS file formats; these formats are not supported by Performance Box Touch V2. Please reformat as per the instructions below.

SD Card Reformatting

  • FAT32 reformatting for media with sizes up to 32 GB can be done directly in Windows by right-clicking on the media and selecting 'Format'.
     
  • If you would like to format media with sizes above 32 GB into a FAT32 file system, you cannot do it directly in Windows as it is not the standard formatting for the file. However, there are many third-party software programs you can use to reformat media so that they will work correctly with our products - we recommend  This Tool as a free option from the SD card organisation.

Logged Channels

Performance Box Touch logs channels to a .vbo file on an inserted SD card. The channel information is as follows:

  • Satellites: This is the number of satellites in use.
  • Time: This is UTC time since midnight in the form HHMMSS.SS.
  • Latitude: Latitude in minutes MMMM.MMMMMMMM +ve = North e.g. 3169.30644410M = 52D, 49M, 18.4S.
  • Longitude: Longitude in minutes MMMMM.MMMMMMMM +ve = West e.g. 00040.18164742M = 00D, 40M, 10.9S.
  • Velocity: Velocity in km/h.
  • Heading: Heading in degrees with respect to North.
  • Height: Height above sea level in meters based on the model of the earth used by thye VBOX GNSS engines.
  • Vertical velocity: Vertical velocity in km/h. +ve velocity uphill, -ve velocity downhill.
  • Long accel: Longitudinal acceleration in g, +ve for forward acceleration.
  • Lat accel: Lateral acceleration in g, +ve for acceleration to the left.
  • Solution type: Indicator for what the unit is currently using to derive position: 0 = No sats; 1 = Standalone using GNSS only; 2 = SBAS.

You can find more information on the VBO file format here.

 

  • Was this article helpful?