Advanced

Configure the Analogue 1 and 2 signals on the AD OUT port, including the source and the 5-Volt value and 0-Volt value.  This provides a linear 0-to-5-Volt output over a configurable range from any source (standard VBOX 4 channels and A/D inputs)

This is a dropdown menu with the available source signals based on standard VBOX 4 channels and A/D inputs.

You can scale the signal output to best suit the test conditions by setting the 5 V = and 0 V = options to the required limits.

You can set the wheel speed inputs with an already configured CAN input channel. 

You can select channels for wheel speed from the internal database or from a database file. 

Click the Add wheel speed input button to open the Select wheel speed input channels window and set your input channels.

Select the User radio button to choose wheel speed input channels from a user-configured database file. 

Select the Vehicle database button to choose wheel speed input channels from the internal vehicle database.

Make – Use the dropdown menu to see a list of available makes and select the one that applies to your setup. 

Model – Use the dropdown menu to see a list of all available models and select the one that applies to your setup.

The Connection details area will provide you with available CAN connection information for the selected vehicle. 

The Wheel Speed 1 and 2 sections will display lists of available options for Wheel Speed 1 and 2, based on your selection in the vehicle database or your database file. 

After configuring your wheel speed inputs, you must measure and enter the offset from the antenna to the wheel reference point. The Wheel speed reference point is the centre point between the rear wheels. Make sure that your measurements are in line with this point.