Skip to main content
RACELOGIC Support Centre

Braking Accuracy Analysis

The Braking Accuracy pass condition available within VBOX Test Suite Brake Speed and Brake Trigger tests allows you to specify a braking accuracy limit as a percentage (3% by default).

VBTS Brake Accuracy Analysis.png

When 3 or more runs are selected, the 'Accuracy' value is populated at the bottom of the Results table beneath the Distance and Corrected Distance column.

Depending on what percentage limit is entered, the accuracy results cell will be highlighted based on the following:

  • Green if the accuracy is below the limit stated
  • Red if the accuracy exceeds the limit stated
  • Orange if less than 3 runs are selected

The Braking Accuracy Analysis is calculated by the following formula:

(standard deviation/average)*100

  • Was this article helpful?