Getting Started
Registration |
 |
What is in the box?
When you purchase a VBOX LapTimer (RLVBLAP-R) you will find the following items when you open the box:
| Product Code | Quantity | Description |
|---|---|---|
| VBLAP02-R-V1 | 1 | VBOX LapTimer Unit with connectors on the rear |
| RLACS262 | 1 | GNSS Antenna |
| RLCAB14LE | 1 | Unterminated Power Cable |
| RLACS313 | 1 | 8 GB SD Card |
| RLACS359 | 1 | Rear Connector Bracket Assembly |
Optional Extras
| Product Code | Description |
|---|---|
| RLCAB010LE | In-Car Power Supply |
Power Supply
Any suitable 12 V supply powers the LapTimer. You must wire the unterminated end of the RLCAB014LE cable directly to a compatible power supply or to a connector that you can use with a compatible power supply.
The power port is the top Lemo port on the unit.
When you power up the LapTimer unit, the LEDs will light white and sweep through the LED array to indicate that the unit is powered and initialising.
Compatible Media
Buttons
OK Button
 |
You mostly use the OK button to configure the settings in the Menu. However, it will also have some functionalities depending on the mode that is currently active on the screen. See the list below for the full list of functionalities for the different display modes. |
|
| Mode | Function |
|---|---|
| Speed | Start and stop logging |
| Max Speed | Reset max speed value |
| Predictive Lap Timing | Single press fixes the current or stored lap as the reference lap, depending on the chosen settings. |
| Predictive Lap Timing | Pressing for >4 s clears the stored reference lap and all lap timing data |
| Lap Timing | Set a new start/finish line |
| Lap Count | No action |
| Lateral G | Reset max g reached |
| Longitudinal G | Reset max g reached |
Shortcut Button
 |
Pressing this button in any display mode (except Speed Mode) will make the unit display the Speed Mode for 10 seconds before returning to the original display mode. It will also act as a shortcut to exit the settings and go back to the display modes. |