Display Menu

Press the OK button with this setting highlighted to enter the Speed Menu.

Press the OK button with this setting highlighted to enter the Accel Menu.

This setting is enabled by default. It gives you the ability to decide if the unit will dim the screen or not based on inactivity.

If the GNSS speed is less than 5 km/h for more than 5 seconds, the unit is not timing a pit stop, and there has been no user interaction for 60 seconds (button press or SD card event), the screen brightness will reduce to brightness setting 1. When the unit registers activity again, the screen brightness will go back to the level selected in the settings. 

Press the OK button with this setting selected to toggle between Enabled and Disabled. The displayed mode is the selected mode. Move away from the setting to confirm it.

Press the OK button with this setting highlighted to cycle through the available screen brightness levels on your unit:

• 1
• 2
• 3
• 4
• 5 

The unit will apply the screen brightness immediately. 

The displayed option is the selected one. When you are happy with your selection, use the Down button to move to the next setting in this menu. 

Press the OK button with this setting highlighted to cycle through the available LED brightness levels on your unit:

• 1
• 2
• 3
• 4
• 5 

The unit will preview the LED brightness by lighting the LEDs white with the selected brightness level when you select a new level. 

The displayed option is the selected one. When you are happy with your selection, use the Down button to move to the next setting in this menu. 

Press the OK button with this setting selected to toggle between Enabled and Disabled. The displayed mode is the selected mode. Move away from the setting to confirm it.

When this setting is enabled, the display will change from the default black background with white text to a white background with black text. 

Press the OK button with this setting selected to toggle between Enabled and Disabled. The displayed mode is the selected mode. Move away from the setting to confirm it.

When this setting is enabled, the main font on the display will change from the default block colour to an outlined font. 

Press the OK button with this setting highlighted to cycle through the available screen orientation modes on your unit:

• Auto
• Normal
• Inverted

The unit will change the screen orientation upon selection.

The displayed option is the selected one. When you are happy with your selection, use the Down button to move to the next setting in this menu. 

Press the OK button with this option highlighted to navigate back to the Main Menu.