Skip to main content
RACELOGIC Support Centre

Display Menu

This page covers the settings in the Display menu on VBOX Pit Lane Timers (RLVBPIT-S and RLVBPIT-R variants).
Speed Menu 

The Speed Menu contains settings that are relevant for the Speed Display Mode. Press the OK button with this option selected to enter the Speed Menu and access settings for Speed Units, Speed Decimal Places and Speed Smoothing.

Display Menu_Speed Menu.png
Speed Units

This setting gives you the ability to change the speed unit used in the unit. 

Press the OK button to cycle through the available options:

  • Km/h
  • Mph
  • Knots
Display Menu_Speed Menu_Speed Units.png
Speed Decimal Places 

This setting gives you the ability to add or remove decimal places to the speed value displayed on the unit. 

Press the OK button to cycle through the available options:

  • 0
  • 1
  • 2 
Display Menu_Speed Menu_Speed Decimal Places.png
Speed Smoothing Level

This setting gives you the ability to increase or decrease the speed smoothing on your unit. 

Press the OK button to cycle through the available options:

  • 0
  • 1
  • 2
  • 3
  • 4
Display Menu_Speed Menu_Speed Smoothing.png
 Back
Press the OK button with this option selected to navigate back to the Display Menu Display Menu_Speed Menu_Back.png
Screen Brightness 

This setting gives you the ability to increase or decrease the brightness level of the LCD Display. 

Press the OK button with this setting selected to cycle through the available options:

  • 1
  • 2
  • 3
  • 4
  • 5

The display brightness will be applied immediately as you cycle through the levels

Display Menu_Screen Brightness.png
Screen Auto-Dim

This setting is enabled by default. It gives you the ability to decide if the unit will dim the screen or not based on inactivity.

If the GNSS speed is less than 5 km/h, the unit is not timing a pit stop and there has been no user interaction for 60 seconds (button press or SD card event), the screen brightness will reduce to brightness setting 1. When the unit registers activity again, the screen brightness will go back to the level selected in the settings. 

Press the OK button with this setting selected to toggle between Enabled and Disabled.

Display Menu_Screen Auto-Dim.png
LED Brightness

This setting gives you the ability to increase or decrease the brightness level of the LEDs on the unit. 

Press the OK button with this setting selected to cycle through the available options:

  • 1
  • 2
  • 3
  • 4
  • 5

The LEDs will preview each brightness level as you cycle through the levels

Display Menu_LED Brightness.png
Orientation Mode

This setting gives you the ability to change the orientation of the display. This is useful if you need to mount the unit upside down due to access or if you want it to change the orientation automatically when it detects a change in unit orientation.

Press the OK button with this setting selected to cycle through the available options:

  • Auto
  • Normal
  • Inverted

The display will change the orientation immediately as you cycle through the options.

Display Menu_Orientation Mode.png Display Menu_Inverted Screen.png

 

Inverted Colour

This setting gives you the ability to switch the display from the default setting of white text on black background to black text on white background. 

Press the OK button with this setting selected to toggle between Enabled and Disabled.

Display Menu_Inverted Colour Disabled.png Display Menu_Inverted Colour Enabled.png
Outline Font

This setting gives you the ability to change the font from the default block colour to an outlined font. 

Press the OK button with this setting selected to toggle between Enabled and Disabled

Display Menu_Outline Font.png
Display Menu_Outline Font_Standard Background.png Display Menu_Outline Font_Inverted Background.png
Back
Press the OK button with this option selected to navigate back to the Main Menu Display Menu_Back.png

 

  • Was this article helpful?