Skip to main content
RACELOGIC Support Centre

07 - VBOX Video Performance Tests - macOS

Adding performance tests

To add any of the eight available tests, navigate to the performance tests setup screen. This area can be accessed by using the ‘Channel Settings’ button in the top left menu bar, and then selecting the 'Performance tests' tab from the Settings pop-up menu.

VBVS Mac CAN Settings Button.png VBVS Mac PT Button.png

To return to the scene designer, select 'Close' in the bottom right corner of the Settings pop-up menu.

VBVS Mac PT Overview.png

There are eight standard performance tests which can be selected within the scene designer. To add a test, click on the 'New' button. This will add the tests one by one in the order shown below:

VBVS Mac PT Add Test.png

Pressing ‘Remove’ next to a test will remove that test from the scene.

Adding to a text element

These tests can be assigned to any text elements. To add a performance test into a scene, click the ‘Text’ icon within the scene designer as shown below.

VBVS Mac Text Icon2.jpg

This will add a new text element into the main view window.

VBVS Mac Text Element .png

Within the right-hand panel, the parameter settings can be set to ‘Performance tests’ and then the desired test chosen.

VBVS Mac PT Parameter.png

Performance Test results will show as ‘Time taken’ by default. The following format options can be selected.

VBVS Mac PT Time Taken.png

Once the parameter has been set as desired, the performance test will actively display on the video overlay.

Note that all on-screen performance tests will start in a stopwatch-style counter when the start conditions are met, and will freeze holding results on screen as soon as test end conditions are achieved.

Tests will be reset and started again after a completed test has been done when the start conditions for the test are met again.

Editing performance tests

To edit a performance test, select the test from the left hand list. The settings for this test will then be shown in the main view window.

VBVS Mac PT Settings.png

There are a number of standard tests which can be easily selected using the ‘select standard test’ drop down list.

VBVS Mac PT Select Test.png

When a new test is selected, press the 'Close' button to save the changes. This will update the name shown in the left-hand list, and will then appear for selection within the scene designer screen.

User-defined performance tests – including speed to distance tests

Tick the ‘User defined’ box to access all performance test settings.

VBVS Mac PT User Defined.png

Start of test settings

Here, the start speed for the test can be set. If the ‘one foot rollout’ box is marked, this will fix the start speed to zero.

For more information about one foot rollout, click here.

VBVS Mac PT Start of Test.png

End of test settings

This area allows the test end conditions to be defined. Either set an end speed, or distance value.

Marking the ‘beep at end test’ box will cause the HD2 to sound a single tone upon test completion.

VBVS Mac PT End of Test.png

Mid-Speed settings

Enabling this setting allows a mid-speed to be added to the test – for example ‘0 – 100 – 0’ tests.

When this box is marked, a speed value area will appear as shown below.

VBVS Mac PT Mid Speed.png

Note: Mid-speed is disabled when running speed to distance tests.


Use these two drop-down boxes to set the units of measurement used in the tests.

VBVS Mac PT Units.png

Speed – select from:

  • km/h (default)
  • mph
  • kts
  • m/s
  • ft/s

Distance – select from:

  • m (default)
  • ft
  • km
  • mi
  • nmi
Saving test changes

Press the 'Close' button to save any changes. This will update the name shown in the left-hand list, and will then appear for selection within the scene designer screen.

Note that performance tests are saved within individual scene files.

  • Was this article helpful?