Skip to main content
RACELOGIC Support Centre

04 - LabSat Installing Software

Configuration and control of the LabSat is performed using the supplied LabSat Software. Before using your LabSat it is necessary to install the software which also contains the USB drivers required for communication.  Once this has been done the USB cable should be connected to the LabSat prior to it being powered, this allows the configuration of the USB connection from LabSat to the computer.
 

When you connect to the LabSat via USB A to B cable for the first time you will be required to install USB drivers, please see the section ‘Connecting LabSat USB’ below.
 

Insert the supplied CD-ROM into the CD drive of your computer.  An installation dialog will automatically appear; follow the onscreen instructions to complete the installation of the setup software.
 

After installation the CD-ROM can be removed and an icon should have appeared on your desktop that will allow you to start the LabSat software.
 

The LabSat software can also be downloaded from here.

  • Was this article helpful?