Skip to main content
RACELOGIC Support Centre

08 - Web Server System Setup

system_setup1 (1).png


  • Network Settings – Change the current network/LAN configuration of the LabSat currently in use.
    Note: Changing these settings will require you to reconnect the device after changes.
  • Clock Source Options – Define whether the LabSat uses its internal TCXO, OXCO or an external 10 MHz reference clock input. When using TCXO or OCXO, it is also possible to enable a 10 MHz clock output from the REF port of LabSat 3 Wideband.
  • Was this article helpful?