Refine results by selecting a filter or click on 'All results' to search the whole site.
Skip to main content
RACELOGIC Support Centre

Network Security

  1. Last updated
  2. Save as PDF
This page contains information about how to enable Network Security on LabSat 4 (P) and how to access files when it has been enabled.

You can enable/disable Network Security in the LAN settings (Menu -> Setup -> LAN -> Network Security) or under Wired Network Options in the System Setup menu in the LabSat 4 Web Server. 

Press the OK button with this option highlighted to enable the Network Security and make the Scenarios folder in File Explorer password-protected.

When network security is enabled, you will be prompted to enter credentials to gain access to the LabSat4 folder in File Explorer.

The username is generic for all LabSat 4 units, but the password contains the connected unit's serial number.

Username: labsat4

Password:  labsat4_AXXXXX


The image shows the Enter network credentials prompt when you try to access the folder in Windows File Explorer. 

Notes: 

  • If you are using a Windows-based PC, you must type a backslash (\) before the username (\labsat4).
  • The username and password are case-sensitive. 
NetworkSecurity_AccessFolder.png

 

  1. Back to top
  • Was this article helpful?

Recommended articles

  1. Article type
    How-to
    Audience
    Public
    Article Status
    Published
  2. Tags
    This page has no tags.