Vehicle Contact Points Overview

BSD - 2 Targets, Static Base, IMU, Load Points
2 Target Vehicles Overview
Hardware Configuration - 1 / 2 Target Vehicles (Static/Moving Base and IMU)
Static Base Station Configuration
VBOX Configuration - 2 Target Vehicles (Static Base Station)
Vehicle Contact Points Overview
Loading Vehicle Contact Points
Setting a Reference Line
ADAS Radio Link - 2 Target Vehicles
ADAS Dual Antenna Configuration
Smoothing - 2 Target Vehicles
ADAS IMU Integration Configuration - In-Vehicle Mounted
ADAS Satellite Elevation Mask
ADAS CAN Outputs - 2 Target Vehicles
Video Overview of BSD Testing using VBOX

ADAS User Guide step 6 of 15

VBOX Configuration - 2 Target Vehicles (Static Base Station)
Loading Vehicle Contact Points

Last updated
Save as PDF
Share
1. Share
2. Tweet
3. Share

Using VBOX Manager, by selecting 'Subject' within 'ADAS Function' in the '1 Target', '2 Target' or '3 Target' modes within the 'ADAS' menu, the user can set the vehicle contact points by entering the ‘Contact Points' menu for each vehicle.

In this menu, it is possible to define contact points for the ‘Subject Vehicle’, ‘Target Vehicle 1’, 'Target Vehicle 2’ or ‘Target Vehicle 3’. You can manually configure up to 2 contact points by entering a numerical offset, or you can set up to 24 contact points by using a GPS antenna (not available with 3 Target mode).