MFD Touch - PIN OUTS
Right side view of MFD Touch
Connector 1 - CAN (Lemo 5 PIN)
Bridged CAN bus with active 120 ohm terminating resistor.
| PIN | I/O | Function |
|---|---|---|
| 1 | O | RS232 Tx (reserved for future development) |
| 2 | I | RS232 Rx (reserved for future development) |
| 3 | I/O | CAN High |
| 4 | I/O | CAN Low |
| 5 | I | Power |
| Chassis | I | Ground |
Connector 2 (Lemo 5 PIN)
Bridged CAN bus with active 120 ohm terminating resistor.
| PIN | I/O | Function |
|---|---|---|
| 1 | O | RS232 Tx (reserved for future development) |
| 2 | I | RS232 Rx (reserved for future development) |
| 3 | I/O | CAN High |
| 4 | I/O | CAN Low |
| 5 | I | Power |
| Chassis | I | Ground |