01 - DAC01 Introduction
The CAN to analogue output module is designed to convert CAN bus data into a voltage, frequency or level output. In this way it is possible to log data from a CAN bus with data logging equipment not incorporating a CAN interface.
Four analogue voltage outputs are available and these can be mapped using the configuration software to output virtually any CAN bus parameter. An example might be throttle position data read from CAN and converted into a 0 to 10 V signal.
The module is also equipped with seven digital outputs, of which four can be set as frequency generators.
|CN (CAN)||Flashes Blue as the DAC01 receives CAN data.|
|SC (Serial)||Flashes Green as the DAC01 receives RS232 data.|
|PR (Power)||Solid Red as long as the DAC01 is powered up.|
|VBOX CAN to analogue output module||VBDAC01|
|VBOX serial PC cable||RLCAB001|
|5 way Lemo to 6 wire un-terminated||RLCAB015-L|
|25 Way D connector for VB products||ADC25IPCON|