How to Cold Start a Speed Sensor
There are two ways that a coldstart can be performed on the Speed Sensor:
- Software: Connect the Speed Sensor to PC using the RS232 connector of the RLCAB093 loom. Open VBOX Setup Software, select the Speed Sensor from the drop down menu and connect to this unit. From the General tab, there is a button to perform a GPS Coldstart. The LED's on the Speed Sensor will all turn red, and return to normal function when the coldstart procedure has completed.
- Digital Input: If the Speed Sensor's Digital Input is configured to Lap Pulse mode, a coldstart can be performed by grounding the input while connecting the Speed Sensor to power. If done correctly, the LED's on the Speed Sensor will all turn red, and return to normal function when the coldstart procedure has completed.