3.1 GNSS Menu

Last updated
Save as PDF
Share
1. Share
2. Tweet
3. Share

This page contains information about the GNSS menu under the Front Panel settings on the VBOX 25 Hz Speed Sensor (v2) unit.

You can access the menu by pressing the OK button. Use the Up and Down arrows to navigate through the menu and press the OK button to enter a submenu or change a setting. When you edit a setting, the Up and Down buttons will let you scroll through the available options for that setting and the OK button will confirm your selection. Use the Back button to exit a setting.

You can use this menu to configure the GNSS settings.

GNSS Coldstart

This setting will perform a coldstart of the GNSS Engine.

You can find more information here.

Elevation mask

This setting lets you change the elevation mask, which is selectable from 10 to 25°.

If the testing area has nearby trees or buildings, you may benefit from increasing this value to reduce the effect of multipath.

You can find more information here.

10 (default), 15, 20, 25

Note: Increasing this value will reduce the number of satellites the VBOX will be able to use.

VBSS100-V5_GNSS_Elevation Mask_10_Selected (Framed).png