Refine results by selecting a filter or click on 'All results' to search the whole site.
Skip to main content
RACELOGIC Support Centre

General

  1. Last updated
  2. Save as PDF
This page contains an overview of the features in the General Menu in VBOX Software connected to VBOX 4 ADAS.

​The General menu contains the following areas:

  • A configuration area that will give you the option to save or load a configuration file or to reset the configuration to the default settings. It also displays a summary of the configurations that are currently set for your unit. 
  • A connection section where you can see the active COM port and a Disconnect button. 
  • A section for information about the VBOX unit.
  • A summary section for recent configurations.

VBSetup_VB4ADAS_General_Default_edited_750px.png

 Configuration

In this area, you can Load/Save settings from/into a configuration file to keep setups for future use. When saved, all presented VBOX Setup configurations are saved along with configurations of connected modules and Multi-Function/OLED displays. When you load a file, VBOX Setup will notify you of settings that are incompatible with your system.

This section displays the current configurations for Logging, DGPS, Dual Antenna, IMU, ADAS and CAN. It will also display a list of modules currently connected to the VBOX 4 unit, thus giving you a quick overview of the current system setup so that you do not need to click through each menu tab to find this information.  

Notes:

  • Configuration files will be saved as .rsf files. VBOX Setup will still be able to load configuration files from earlier firmware versions (.rcf files).
  • Configuration files that have been saved using VBOX 4 Single and Dual Antenna units cannot be loaded into VBOX 4 ADAS units. 
VBSetup_VB4ADAS_General_Configuration.png
Connection 

This area displays the selected COM port and includes a disconnect button.

 VBSetup_VB4ADAS_General_Connection.png
VBOX Information

This area displays the serial number and installed firmware version of the connected unit, as well as the current software version and hardware code.

By clicking on the Information Icon, you will be taken to the Engineering Diagnostics tab in the GNSS menu which will display the complete information about the connected VBOX unit.

 VBSetup_VB4ADAS_General_VBOXInformation.png
Recent Configurations

This area displays the recent configuration changes that have been applied to the unit.

Restore last configuration 

 If there is a back-up for the specific VBOX 4 unit connected to VBOX Setup, it will be presented at the top of the Recent configuration section. Click the Restore last configuration button next to the Recent configurations heading to use these configurations
VBSetup_VB4ADAS_General_RecentConfigurations.png

 

  1. Back to top
  • Was this article helpful?

Recommended articles

  1. Article type
    Reference
    Audience
    Public
    Article Status
    Published
  2. Tags
    This page has no tags.