Getting Started
Registration
What is in the Box?
When you receive your new VBOX 4 Dynamics (RLVB4D), you will find the following in the box:
Product Code | Quantity | Description |
---|---|---|
VB4D-V1 | 1 | VBOX 4 Unit (Dynamics) |
RLVBACS020 | 1 | Mains Power Supply |
RLACS356 | 2 | Wideband GNSS Magnetic Antenna |
RLCAB080-4 | 2 | Antenna Cable (4 m) |
RLACS352 | 1 | 32 GB SD Card |
SUBCON15M-SH | 1 | 15-way D Sub Connector |
RLCAB042 | 1 | USB ‘A’ to USB ‘B’ 2-m cable |
RLCAB010LE | 1 | 2-way LEMO Power Lead to 12V Cigar Lighter – 2 m |
RLACS163 | 1 | USB multi card reader |
STK0129 | 4 | Antenna Location Sticker - Roof Mount |
RLACS351 | 1 | VBOX 4 Padded Carry Case |
RLACS091 | 1 | VBOX Tape Measure |
RLCALUKAS100 | 1 | Certificate of Calibration – UKAS Accredited |
Media
SD Cards
VBOX 4 Dynamics will log data to an SD inserted via the Front Panel.
Media Status
VBOX 4 Dynamics needs an appropriate SD card with a sufficient amount of available space inserted to create a log file.
The SD card you want to use in your VBOX unit must have a minimum of 500 MB available space to start a log file. If it does not have enough available space, the VBOX unit will alert you with an audible alert and a flashing LOG LED.
If the SD card becomes full while it is logging, the VBOX unit will close the file and alert you that the inserted media is full with an audible alert and a flashing LOG LED. You will not be able to start a new log file until you have inserted an SD card with enough available space.
Bluetooth
VBOX 4 units have an internal Bluetooth antenna to give you the ability to connect to your VBOX unit and output real-time serial data at the full 100 Hz data rate via Bluetooth.
You can find information about how to connect via Bluetooth here.
To configure your VBOX unit via Bluetooth, you must make sure that you have downloaded and installed the VBOX Setup software.
To view live data, you must make sure that you have downloaded and installed the VBOX Test Suite software.