Menu Options
| You can access the DSP05 OLED Display menu by pressing the square button when the ‘Menu’ screen is displayed. You can navigate the menu with the ▲▼ buttons. |  |
Scene Selection
SpecifiedYou can load up to 8 user-defined scenes by placing them in the root folder of an SD card and inserting it into the connected Video VBOX Lite. All the required scenes must be loaded at the same time. Every time you load scenes to the Video VBOX Lite, they will overwrite those previously saved on the unit. You can select the scene on the DPS05 OLED Display. If there are scene files on the Video VBOX Lite, a screen will prompt you to select a scene when you power up the DSP05 OLED Display. If you press the ▼ button when you see this prompt, the DSP05 OLED Display will show you a list of available scenes. Once the DSP05 OLED Display is powered and in use, you can access the scene selection through the main menu. |
|
DefaultEach Video VBOX Lite has a default scene included within the firmware. Press the square button when this option is highlighted to use this scene. |
 |
BackPress the square button with this line highlighted to exit the Scene Selection menu and go back to the main menu. |
 |
Track Selection
|
When the Video VBOX Lite has acquired satellites, it will check the GNSS location against Racelogic’s track map database and load the available layouts. Where a track has multiple layouts, you must use this menu option to select the layout you are driving, as this allows the DSP05 OLED Display to load the correct start/finish line(s). If start/finish lines are not available for your location, you can set them manually. |
|
BackPress the square button with this line highlighted to exit the Track Selection menu and go back to the main menu. |
 |
View Lap Times
|
The DSP05 OLED Display will store all the lap times from your current session (maximum of 99 lap times). The lap times will be cleared when you set a new start line or when you reset the lap timing data. BackPress the square button with this line highlighted to exit the Lap Times and go back to the main menu. |
|
Clear Lap Times
| Selecting this option will wipe all stored lap times from the unit’s memory. It will automatically take you back to the main menu after clearing the history. |
|
Predictive Lap Timing Settings
Bar RangeThis setting alters the amount of +/- time shown on the bar graph during lap prediction. You can choose either 2, 5, 10 or 30 seconds. |
 |
Delta-T Speed Mode |
|
|
When enabled, this mode will change the Predictive Lap Timing display to show your current speed as well as Delta-T information, when your speed drops below a specified threshold for a set amount of time. This function is optimised for use with both 'Virtual Safety Car' conditions and Pit Lane speed limits. The Delta-T Speed Mode is disabled by default. The default settings are: Speed: 65 km/h The display will return to the Predictive Lap Timing mode when your speed increases to 5 km/h over the configured Delta-T Speed Mode value. For example, if you have set your DSP05 OLED Display to Predictive Lap Timing mode and you have enabled Delta-T Speed Mode;
|
|
Delta-T Speed Mode |
Press the square button when this line is highlighted to enable the mode. A tick will appear when enabled. |
Speed |
Press the square button to change the speed. You will see two arrows (up and down) appear next to the value. Use the two arrow buttons on the device to increase/decrease the speed value. Press the square button again to confirm your selected value. |
Time Delay |
Press the square button to toggle between the available time values. Each time you press the button the value will increase in increments of 0.5 s, up to 5.0 s, before it cycles back to 0.0 s. Press one of the arrow buttons to move away from the setting and save the displayed time. |
Back |
Press the square button with this line highlighted to exit the Delta T Speed Mode settings and go back to the Predictive Lap Timing Settings. |
Transfer Ref. lap to...This feature lets you save a reference lap for future use. Insert an SD card into the connected Video VBOX Lite and use the following menu options. Note: The vehicle must be stationary to make this transfer.
|
 |
Load Ref. Lap from...To load a reference lap file stored from a previous session, put the desired file onto an SD card and load the card into the Video VBOX Lite. The file must be named OLED.REF and placed in the root directory of the SD card. Select the following menu options. Note: The vehicle must be stationary to make this transfer. |
 |
Minimum Lap TimeThis setting allows you to set a minimum time for laps, making shorter laps invalid. Invalid laps will not be counted in the lap count, appear in the lap times or used as a reference lap. Press the square button to change the minimum lap time. You will see two arrows (up and down) appear next to the number. Use the two arrow buttons on the device to increase/decrease the minimum time. Press the square button again to confirm your selected value. |
 |
Fixed Lap ModePress the square button to toggle between the available settings: Note: When you have fixed a reference lap, you will see a message confirming your selection on the screen and a Padlock icon will appear. If you fix a stored lap the icon will appear instantly, if you fix the current lap, the icon will appear when the lap has been completed. |
 |
Fixed Stored |
This option sets the reference lap that is currently stored in the memory as the fixed reference. This is the default setting. |
Fix Current |
This option sets the current driven lap as the fixed reference once the lap has been completed. Note - if you choose to fix the current lap, this should override any Minimum Lap Time setting as you are making the decision to set the current and full lap as the reference. |
BackPress the square button with this line highlighted to exit the Predictive Lap Timing Settings and go back to the main menu. |
 |
_Delta_T_Speed_Mode_(500x196).png?revision=1&size=bestfit&width=524&height=206)
Lap Timing Menu
Set Start & SplitsPressing the square button sets a new start/finish point. After this, the DSP05 OLED Display will read “Set split 1”. Press the square button to set the split or ▼ to skip through split points, Finish line and back. If you set a new start/finish or split line, the lap count, best lap and all the best split time values will be reset automatically. |
 |
Clear Start & SplitsPress the square button to clear any start/finish and split point information from the DSP05 OLED Display's memory. |
 |
Reset Laptiming DataWith this option highlighted, press the square button to reset the stored reference lap, lap count and lap times. Note: This option fully resets the predictive lap timing mode. |
 |
Split Time Display PeriodThis function allows you to set how long the split time is shown on the DSP05 OLED display when a split line or the start/finish line is crossed. There is a choice of 2s, 5s, 10s, 15s or 20s. Press the square button to cycle between these options. |
 |
Split to Split TimeWhen this option is selected then the calculated split times will be split to split and not accumulative from the start of the lap. |
 |
Rolling Lap TimeSelecting this function will show a continuously counting lap time which briefly freezes as the start/finish line is crossed. |
 |
One Shot ModeWhen one shot mode is enabled, timing will start when movement is detected, after being stationary for more than 10 seconds. This will automatically reset when the user comes to a stop. After 2 seconds of being stationary, the screen counts down from 5 then shows ARMED – Start when ready. |
 |
Gate Width1-100 m |
 |
Back |
 |
Display Menu
ModesThe DSP05 OLED Display has two Display Menu Modes for the Features; Basic Mode and Advanced Mode. This allows you to keep the full functionality of the DSP05 OLED Display or to reduce the amounts of Display modes to the Basic features. The tables below list the Display Modes available in each Display Menu Mode. Press the square button to toggle between the options: |
 |
||||||||||
Basic Modes |
|
||||||||||
Advanced Modes |
|
||||||||||
BackPress the square button with this line highlighted to exit the Modes settings and go back to the Display Menu. |
 |
||||||||||
Speed Settings
|
|||||||||||
Speed UnitsIf the square button is pressed the DSP05 OLED Display allows the user the ability to select the units of the displayed speed. Highlight the desired measurement type and press square to select. mph, km/h, kts |
 |
||||||||||
Speed Decimal PlacesPressing the square button will cycle through 0, 1, and 2 decimal places. |
 |
||||||||||
Back |
 |
||||||||||
Accel Settings
|
|||||||||||
Accel Decimal PlacesPress the square button to toggle through 0, 1, and 2 decimal places. |
 |
||||||||||
Accel SmoothingPress the square button to toggle through five smoothing settings. |
 |
||||||||||
BackPress the square button with this line highlighted to exit the Accel Settings and go back to the Display Menu. |
|
||||||||||
BrightnessPress the square button to toggle through five brightness settings. 1 is the darkest setting and 5 is the brightest setting. The display will change its brightness as you toggle through each setting to make it easier to find the correct level for you. |
 |
||||||||||
Invert Screen ColourPress the square button when an option is highlighted to toggle it on or off. When you select an option, a tick will appear next to it and the display applies the setting accordingly. See the images below for examples of the four different colour and font combinations. |
 |
||||||||||
Use Outline FontPress the square button when an option is highlighted to toggle it on or off. When you select an option, a tick will appear next to it and the display applies the setting accordingly. See the images above for examples of the four different colour and font combinations. |
|
||||||||||
BackPress the square button with this line highlighted to exit the Display Menu and go back to the Main Menu. |
 |
About
|
In this section, you can find the Installed firmware version and the serial number for both the DSP05 OLED Display and the connected VBOX data logger. You can also find the unit type for the connected VBOX data logger. The firmware version of the OLED Display will also be visible on the screen while it boots up. BackPress the square button with this line highlighted to go back to the Main Menu. |
|
Exit
| Press the square button with this line highlighted to exit the Menu and go back to the Display Modes. |  |