06 Logging - Performance Box Touch V2
Logging
Performance Box Touch logs data via an SD card inserted into the SD Card Slot on the left-hand side of the unit. Depending on the Logging Strategy you have selected in the General Settings, the unit will either log continuously or only when it detects movement. |
You can manually override the configured logging strategy by tapping on the SD Card Icon when it is green to start or stop the logging. | |
The Record Icon will show when the unit is logging data to the SD card. If you have come to a stop, but the Record Icon is still on, you must press the SD Card Icon to stop the logging before you remove the SD card.
Note: If the SD card is removed while the box is still recording, you may need to repair it on a PC before you can use it again. |
SD Card Format
Performance Box Touch V2 is supplied with an 8 GB SDHC card in a FAT32 file format, which is the only file format it supports. If you are looking to purchase a new SD card, we recommend that any card you use has a write speed of above 7 MB/s (4 MB/s is the absolute minimum) and a speed class of 10 (4 is the absolute minimum). We recommend that you use SD cards from quality brands such as Transcend, SanDisk, Kingston or Lexar to ensure the best results. IMPORTANT |
SDHC cards (2 GB to 32 GB)
Supplied or purchased SDHC cards are formatted in the FAT32 file format. This format is supported by Performance Box Touch V2. |
SDXC cards (64 GB and above)
Purchased SDXC cards will be formatted in exFAT or NTFS file formats; these formats are not supported by Performance Box Touch V2. Please reformat as per the instructions below. |
SD Card Reformatting
|
Logged Channels
Performance Box Touch logs channels to a .vbo file on an inserted SD card. The channel information is as follows:
|