VBOX Configuration - 3 Target Vehicles (NTRIP)
To configure VBOXs within a Subject Vehicle and 3 Target Vehicles using an NTRIP correction solution for Automatically Commanded Steering Function (ACSF)/ Lane Change tests, please follow the steps below:
Place one VBOX into each vehicle - one will be the subject vehicle and three will be the target vehicles.
Target Vehicle 1
- Connect VBOX Manager to the VBOX in Target Vehicle 1.
- Enter the 'SETUP' menu of VBOX Manager.
- Select the 'VBOX' option and scroll to 'Log Rate'. Ensure that '100 Hz' is selected, if it is not, select the menu and choose the option.
![]() |
![]() |
- Scroll to 'Dynamic Mode', select and then choose one of the following options:
- If you are not using IMU integration, set the dynamic mode to 'Medium' and press to confirm, this Dynamics mode is best for ADAS tests.
- If you are using IMU integration, set the dynamic mode to 'High' and press to confirm.
- If you are not using IMU integration, set the dynamic mode to 'Medium' and press to confirm, this Dynamics mode is best for ADAS tests.
- Scroll to 'DGPS Rate' and ensure that '115200' is selected, if it is not, select the menu and choose the option.
- Scroll to 'DGPS Mode', select and then set to 'NTRIP', press to confirm. Further information on NTRIP can be found here.
- Return to the 'SETUP' menu by selecting 'Back'.
- Select the 'ADAS' option and then choose '3 Target' as the ADAS mode, press to confirm.
![]() |
![]() |
- Scroll to 'ADAS Function', select and then choose 'Target 1', press to confirm.
Target Vehicle 2
- Connect VBOX Manager to the VBOX in Target Vehicle 2.
- Repeat steps 2 – 8 in section ‘Target Vehicle 1' above.
- Scroll to 'ADAS Function', select and then choose 'Target 2', press to confirm.
Target Vehicle 3
- Connect VBOX Manager to the VBOX in Target Vehicle 3.
- Repeat steps 2 – 8 in section ‘Target Vehicle 1' above.
- Scroll to 'ADAS Function', select and then choose 'Target 3', press to confirm.
Subject Vehicle
- Connect VBOX Manager to the VBOX in the Subject Vehicle.
- Repeat steps 2 – 8 in section ‘Target Vehicle 1' above.
- Scroll to 'ADAS Function', select and then choose 'Subject', press to confirm.