VBOX CANVEL
This page contains information about adding a CANVEL input channel to your CAN configuration.
If an input channel is given the name CANVEL, the VBOX unit will translate the data of this channel directly through to the GPS speed channel under the following criteria.
- IMU integration is not enabled
- The VBOX cannot calculate speed, i.e. no satellite signal (complete satellite drop out)
The VBOX will scale the input channel to the default speed output format of km/h according to what units have been assigned to the substitution speed channel. VBOX will recognise the following unit names: MPH, KM/H, Knots, m/s, and ms-1.
This function is useful while testing around built-up areas or driving under large bridges.
| Note: If no units have been assigned to the input channel then VBOX will assume that it is km/h. |