Refine results by selecting a filter or click on 'All results' to search the whole site.
Skip to main content
To configure the VBOX for use with an NTRIP correction solution within a Park Assist test, please follow the steps below:
- Connect VBOX Manager to the VBOX in the vehicle.
- Enter the 'SETUP' menu of VBOX Manager.
- Select the 'VBOX' option and scroll to 'Log Rate'. Ensure that '100 Hz' is selected, if it is not, select the menu and choose the option.
- Scroll to 'Dynamic Mode', select and then choose one of the following options:
- If you are not using IMU integration, set the dynamic mode to 'Medium' and press to confirm, this Dynamics mode is best for ADAS tests.
![VBMAN ADAS Subject Contact Points.png](https://en.racelogic.support/@api/deki/files/12508/VBMAN_VBOX_Dynamic_Mode_Medium1.png?revision=1)
- If you are using IMU integration, set the dynamic mode to 'High' and press to confirm.
![VBMAN ADAS Subject Contact Points.png](https://en.racelogic.support/@api/deki/files/12511/VBMAN_VBOX_Dynamic_Mode_High2.png?revision=1)
- Scroll to 'DGPS Rate' and ensure that '115200' is selected, if it is not, select the menu and choose the option.
![VBMAN ADAS Subject Contact Points.png](https://en.racelogic.support/@api/deki/files/12506/VBMAN_VBOX_DGPS_Rate_115200.png?revision=1)
- Scroll to 'DGPS Mode', select and then set to 'NTRIP', press to confirm. Further information on NTRIP can be found here .
![VBMAN ADAS Subject Contact Points.png](https://en.racelogic.support/@api/deki/files/12504/VBMAN_VBOX_DGPS_Mode_NTRIP.png?revision=3)
- Return to the 'SETUP' menu by selecting 'Back'.
![VBMAN ADAS Subject Contact Points.png](https://en.racelogic.support/@api/deki/files/12443/VBMAN_Back.png?revision=2)