To configure the VBOX for use with a Static Base Station when using multiple static points for Traffic Sign Recognition Testing, please follow the steps below:
- Connect VBOX Manager to the VBOX in the vehicle.
- Enter the 'SETUP' menu of VBOX Manager.
- Select the 'VBOX' option and scroll to 'Log Rate'. Ensure that '100 Hz' is selected, if it is not, select the menu and choose the option.
- Scroll to 'Dynamic Mode', select and then choose one of the following options:
- If you are not using IMU integration, set the dynamic mode to 'Medium' and press to confirm, this Dynamics mode is best for ADAS tests.
![VBMAN ADAS Subject Contact Points.png](https://en.racelogic.support/@api/deki/files/12508/VBMAN_VBOX_Dynamic_Mode_Medium1.png?revision=1)
- If you are using IMU integration, set the dynamic mode to 'High' and press to confirm.
![VBMAN ADAS Subject Contact Points.png](https://en.racelogic.support/@api/deki/files/12511/VBMAN_VBOX_Dynamic_Mode_High2.png?revision=1)
- Scroll to 'DGPS Rate' and select the appropriate settings for your radios.
Note: To ensure that the VBOX receives the DGPS correction signal, the correct RS232 rate must be set. All Racelogic blue boxed radios use 115200 kbit/s, Satel grey boxed radios use either 19200 kbit/s or 38400 kbit/s.
- Scroll to 'DGPS Mode', select and then set to the same 2 cm mode that the Base Station is set to. For further info on RTK modes see RTK Configuration.
![VBMAN ADAS Subject Contact Points.png](https://en.racelogic.support/@api/deki/files/12500/VBMAN_VBOX_DGPS_Mode_RTCMv3.png?revision=1)
- Return to the 'SETUP' menu by selecting 'Back'.
![VBMAN ADAS Subject Contact Points.png](https://en.racelogic.support/@api/deki/files/12443/VBMAN_Back.png?revision=2)
- Select the 'ADAS' option and then choose 'Multi Static Points' as the ADAS mode, press to confirm.