Skip to main content
RACELOGIC Support Centre

BSD - 2 Targets, Static Base, IMU Roof, CAN Hub, 2 Points

  • This guide will take you through a step by step process of setting up VBOX 3i units for ADAS Blind Spot Detection (BSD) testing.
  • Expand the contents using the + button to see the list of articles contained within this guide.
  • The next Forward Button.pngarticle can be selected at the top or bottom of the screen to carry on through the guide.
  • The progress bar at the top of the page shows what step you are at within the guide.

    Navigation.png
For a full download of this ADAS User Guide, please click on the PDF icon pdf icon.png

 

Blind Spot Detection (BSD) Testing

Blind Spot Detection (BSD) systems use cameras, radar sensors, light detection or ultrasonic systems to warn a driver whenever another object enters the blind spot area of a car.


With real-time measurement of parameters from up to three vehicles and at better than 2 cm positional accuracy, the VBOX test system allows manufacturers to verify the effectiveness of their Blind Sport Detection system easily and reliably.


Further details on ADAS BSD Testing can be found on our website.

Parameters

ADAS Test Blind Spot Detection (BSD)
Vehicles 1 Subject and 2 Target Vehicles
DGPS Correction Method Static Base Station
IMU Integration Roof Mounted
CAN Hub Yes
Vehicle Contact Points Up to 2


IMPORTANT - Please ensure that all product Firmware and Software versions are up to date!

  • Was this article helpful?