Skip to main content
RACELOGIC Support Centre

CAN – VBOX 3iS Dual Antenna RTK Settings

You can access the menu by pressing the OK button. Use the Up and Down arrows to navigate through the menu and press the OK button to enter a submenu or change a setting. When you edit a setting, the Up and Down buttons will let you scroll through the available options for that setting and the OK button will confirm your selection. Use the Back button to exit a setting. 
You can use this menu to configure the CAN settings. VB3iSDR Main Menu-CAN selected.png

CAN Baud Rate

In this setting you can select the CAN baud rate at which the data will be transmitted from the unit.

  • 125 kbit/s 
  • 250 kbit/s
  • 500 kbit/s (default) 
  • 1 Mbit/s
VBOX 3iSDR_CAN_Baud Rate_500KB_Selected (Framed).png

CAN Termination

Enables or disables the CAN Termination. 

VBOX 3iSDR_CAN_Termination_Enable_Selected (Framed).png

Output Rate

Determines the rate at which data is sent out via CAN.

  • 1 Hz
  • 5 Hz
  • 10 Hz
  • 20 Hz
  • 50 Hz
  • 100 Hz (default)
VBOX 3iSDR_CAN_Output Rate_100Hz_Selected (Framed).png
  • Was this article helpful?