Skip to main content
RACELOGIC Support Centre

ADAS Telemetry

ADAS 1 Target 

Use 1 Target radios to transmit data from a target vehicle to a subject vehicle and vice versa. This enables both vehicles to calculate separation data live.
 

ADAS 2 Target 

Use 2 Target radios to calculate parameters from two target vehicles simultaneously. The data will flow in one direction but allows two target vehicles to transmit their data to one subject vehicle, which can calculate the separation data live.
 

ADAS 3 Target 

Use 3 Target radios to transmit data from 3 target vehicles to a subject vehicle and vice versa. This enables both vehicles to calculate separation data live.

Connections

VBOX 3i

The VBOX 3i unit in the target vehicle transmits serial data from the socket marked SER or RS232 through a server radio to a client radio connected to the VBOX in the subject vehicle. 

You only need one connection as the radio will take power from the VBOX via a 5-way Lemo to 5-way Lemo cable.
 

VBOX 4

IMPORTANT

If your test vehicle has built-in Wi-Fi, you may experience interference on the ADAS radio signals. Where possible, we recommend disabling the vehicle's hotspot before you perform the test. 


The VBOX 4 unit in the target vehicle transmits serial data from the socket marked SERIAL through a server radio to a client radio connected to the VBOX in the subject vehicle. 

You only need one connection as the radio will take power from the VBOX via the 5-way Lemo to 5-way Lemo cable.

VBOX 4 Hardware Connections_ADASRadio (RE v1.0 18JUL2024)_1000px.png

  • Was this article helpful?