DGNSS Telemetry Moving Base - Server Radio - EU (RLRTM24MBS)
Moving Base radios are used to transmit and receive corrections from VBOX 3i RTK units in a Moving Base setup. A Moving Base radio is programmed as ‘server’ when transmitting (vehicle equipped with the Moving Base VBOX) or ‘client’ when receiving RTK correction messages. There is no limit to the number of clients that can get corrections from a server. |
No. of items | Product Code | Description | |
---|---|---|---|
1 | RTM24E-V2 | VBOX ADAS server radio for moving base (transmit) | |
1 | RLACS207 | Elevated feed radio mag mount antenna | |
1 | RLCAB006 | 5-way Lemo to 5-way Lemo Cable - 30 cm | |
1 | RLCAB032 | Serial PC cable for radio |
Specifications
Input Voltage | 8 to 30 V DC |
Input Current - Receiving | < 200 mA |
Input Current - Transmitting | < 200 mA |
Radio Transmission Power | 10 mW |
Base Station Duty Cycle | < 10% |
Carrier Frequency | 2.4 GHz |
Radio Data Rate | 500 kbit/s |
RS232 Data Rate | 115,200 bit/s (configurable) |
Approvals | CE-approved for European use |
Physical
Module Dimensions | 95 mm x 60 mm x 33 mm |
Operating Temperature | - 20 °C to + 60 °C |
Storage Temperature | - 40 °C to + 85 °C |
Transmission Range
Environment | 10 mW |
---|---|
Permitted in countries such as |
EU |
Difficult Environment (e.g. buildings, reinforced concrete) |
120 m (400 feet) |
Open environment with antennas on ground level (e.g vehicle roofs) |
400 m (1,300 feet) |
In view with Base Station antenna at height (e.g. building roof) |
2,400 m (8,000 feet) |
Note: Obstacles such as walls and trees can greatly affect the range |