Skip to main content
RACELOGIC Support Centre

DGNSS Telemetry Moving Base - Server Radio - Japan (RLRTM24MBSJP)

Moving Base radios are used to transmit and receive corrections from VBOX 3i RTK units within a moving base setup. A Moving Base radio is programmed as ‘server’ when transmitting (vehicle equipped with the Moving Base VBOX) or ‘client’ when receiving RTK correction messages. There is no limit to the number of clients that can get corrections from a sever.
Moving base .png
No. of items Product Code   Description
1 RTM24   VBOX ADAS server radio for moving base (transmit)
1 RLACS207   Elevated feed radio mag mount antenna
1 RLCAB006   5-way Lemo to 5-way Lemo Cable - 30 cm 
1 RLCAB032   Serial PC cable for radio


Input Voltage 8 to 30 V DC
Input Current - Receiving < 200 mA
Input Current - Transmitting < 200 mA
Radio Transmission Power 50 mW
Base Station Duty Cycle < 10%
Carrier Frequency 2.4 GHz
Radio Data Rate 500 kbit/s
RS232 Data Rate 115,200 bit/s (configurable)
Approvals FCC/IC-approved for USA/Canada
Approved for Japan


Module Dimensions 95 mm x 60 mm x 33 mm
Operating Temperature - 20 °C to + 60 °C
Storage Temperature - 40 °C to + 85 °C

Transmission Range

Environment 50 mW

Permitted in countries such as 


Difficult Environment

(e.g. buildings, reinforced concrete)

120 m (400 feet)

Open environment with antennas on ground level

(e.g vehicle roofs)

400 m (1,300 feet)

In view with Base Station antenna at height

(e.g. building roof)

2,400 m (8,000 feet)

Note: Obstacles such as walls and trees can greatly affect the range
  • Was this article helpful?