Skip to main content
RACELOGIC Support Centre

DGNSS Telemetry Moving Base - Server Radio - USA/Canada/Russia/China (RLRTM24MBSU)

Moving Base radios are used to transmit and receive corrections from VBOX 3i RTK units in a moving base setup. A Moving Base radio is programmed as ‘server’ when transmitting (vehicle equipped with the Moving Base VBOX) or ‘client’ when receiving RTK correction messages. There is no limit to the number of clients that can get corrections from a server.
Moving base .png
No. of items Product Code   Description
1 RTM24U   VBOX ADAS server radio for moving base (transmit)
1 RLACS207   Elevated feed radio mag mount antenna
1 RLCAB006   5-way Lemo to 5-way Lemo Cable - 30 cm 
1 RLCAB032   Serial PC cable for radio

Specifications

Input Voltage 8 to 30 V DC
Input Current - Receiving < 200 mA
Input Current - Transmitting < 200 mA
Radio Transmission Power 125 mW
Base Station Duty Cycle < 10%
Carrier Frequency 2.4 GHz
Radio Data Rate 500 kbit/s
RS232 Data Rate 115,200 bit/s (configurable)
Approvals FCC/IC-approved for USA/Canada

Physical

Module Dimensions 95 mm x 60 mm x 33 mm
Operating Temperature - 20 °C to + 60 °C
Storage Temperature - 40 °C to + 85 °C

Transmission Range

Environment 125 mW

Permitted in countries such as 

USA, Canada, Russia, China

Difficult Environment

(e.g. buildings, reinforced concrete)

200 m (600 feet)

Open environment with antennas on ground level

(e.g vehicle roofs)

500 m (1,600 feet)

In view with Base Station antenna at height

(e.g. building roof)

3,000 m (10,000 feet)
Note: Obstacles such as walls and trees can greatly affect the range
  • Was this article helpful?