Skip to main content
RACELOGIC Support Centre

05 Setup

An overview of the VBOX Setup software with VBOX 3i Dual Antenna (v5) units with firmware version 3.0 connected. From this page, you can find links to more information about the individual menus available in the Setup software.



You can use the VBOX Setup Software to configure VBOX 3i units. You can download the VBOX Setup software here.

Alternatively, you can also configure some settings with the VBOX Manager


The connection between the VBOX unit and the computer should be made via USB or Bluetooth for optimum performance.

When the VBOX unit is physically connected and powered, open the VBOX Setup software and use the drop-down list to select the COM port that the VBOX unit is connected to. Click Connect and VBOX Setup will open the setup screen for your VBOX unit. 


Note: You may see an auto-detect message if you have changed the baud rate from the default value. Click Yes to allow the different baud rates to be scanned.

General-default_Dual antenna.png

Software Overview
Available menus The menu buttons in the sidebar allows you to select between the different settings menus. Click the buttons to change the menu. VBOXSetup_GeneralMenu_button_framed.png
Menu title Displays the title of the currently selected menu. General_current_menu.png
Help Depending on which menu you have open, the question mark icon will open up the corresponding User Guide page within the Racelogic Support Centre. General_Help.png
Language Change the operating language. General_Language.png
Settings area The white area in the application window contains all the settings. These will vary depending on the selected menu. General-default_Settings Area_cropped.png
Write to unit After making changes to the setup, you must press the Write to unit button to make sure that the settings are uploaded to the connected VBOX unit. General_Write to unit.png
Close Closes the software, if changes have not been saved to the unit, you will be prompted to save the settings. General_Close.png

General Menu

General-default_Dual antenna.png

Channel Config Menu

Channel Config _ dual antenna.png

Logging Menu

Logging - default.png

GPS Menu

GPS - default.png

Dual Antenna Menu

Dual Antenna - default.png

IMU Menu

IMU-default_dual antenna.png


ADAS - default - dual antenna.png

CAN Menu

CAN - Settings.png

Advanced Menu

Advanced - Output.png

  • Was this article helpful?